Step by step guide on how to troubleshoot and repair low oil pressure, this information pertains to all internal combustion engines.
![]()
AIR AND WATER PRESSURE TESTS Test the cylinder block for cracks in the cylinder bores between the water jacket and the oil passages by using either air pressure or water pressure. The purpose of each test is to pressurize the water Jacket to the point, within safe limits, that leaks show.
Difficulty Scale: 5 of 10
Tools and Supplies Needed
![]() Start with the car on level ground, in park with the emergency brake set.
Step 1 - To verify the engine oil pressure is low, start the engine (cold) and observe the gauge or light.
Step 2 - Using the engine oil dip stick, check the oil level of the engine and ensure a proper level.
Step 3 - The oil pressure switch is designed to send feedback data to the gauge or computer. These switches can go bad causing the gauge or light to show a false reading, remove the switch and insert a manual gauge to the engine and restart the engine. The gauge should read between 25 and 45 pounds.
Step 4 - The oil pump uses a screen to keep out impurities before entering the pump. If this screen becomes plugged with sludge due to lack of maintenance, the pump will scavenge causing low pressure. (Engine oil pan removed while turned over.)
SPONSORED LINKS
Step 5 - The oil pump is also designed with an oil pressure relief valve and spring which regulates pressure. If this valve becomes faulty caused by a broken pressure spring the pump will have low oil pressure.
Step 6 - An engine bearing is designed to support the crankshaft and other various engine parts while in motion. When these bearings wear, they can allow more oil to escape causing low oil pressure, this is a sign the engine has worn out and replacement or rebuilding is needed.
![]()
Step 7 - If the engine has no oil pressure, suspect the oil pump drive, some manufactures use a belt to drive the pump which are prone to failure.
Helpful Information
Engine oil is used to cool and lubricate bearing and machined surfaces. Without oil pressure an engine will experience extreme internal engine damage due to heat caused by friction. All engines run on a pre-set pressure that cannot be adjusted. This pressure will vary depending on engine speed, temperature and weight oil. As a rule of thumb, the engine oil pressure gauge shouldn't drop below 1/4 or exceed 3/4 pressure of the gauge.
SPONSORED LINKS
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |